Cut-out brake levers

These brake levers replace your existing levers, so you can connect your existing brake cables to these, and they have a second cable for sending the electrical signals back to the motor. Pulling these levers cuts power to the motor  when used with geared motors, and also  activates regen braking  in direct drive motors.

We have several different plugs available on these levers, the standard connector (if you choose “any/other”) will be a round male 2 pin plug with red shield (as for our 250w and 500w kits).  If you require different plugs to the options we give, or you are unsure, send us an email with a picture upon ordering to clarify your needs.