Hub Motor Kit Parts

Sidebar

Availability

Price

$
to
$
Filter
  • 10
  • 15
  • 20
  • 25
  • 30
  • 50
  • Featured
  • Best selling
  • Alphabetically, A-Z
  • Alphabetically, Z-A
  • Price, low to high
  • Price, high to low
  • Date, old to new
  • Date, new to old
Sort

Sort by:

  • Featured
  • Best selling
  • Alphabetically, A-Z
  • Alphabetically, Z-A
  • Price, low to high
  • Price, high to low
  • Date, old to new
  • Date, new to old
  • Tektro Hydraulic Brake Lever (One) with cutout sensor
    Tektro Hydraulic Brake Lever (One) with cutout sensor
    Tektro EU1.2 Hydraulic Brake Lever, with cutout sensor wires (We will put the correct plug on for you). Perfect for Bafang mid drive conversion kits, or hub motor systems (you'll need to let us know the plug type, if not standard Bafang system, with...
    From $95.00 AUD
    From $95.00 AUD
    Choose Options
    Choose Options
  • LCD3 Display - Hub Motor
    LCD3 Display - Hub Motor
    LCD3 Display Suits motor type: Hub Size: Large Colour: Black and white Connector type: Green Juliette Cable length from display to buttons: 28cm Best for use when a simple, clear display is required. Best choice for situations where sun glare is significant. Adapter cable...
    $60.00 AUD
    $60.00 AUD
  • Half-twist throttle for our HUB systems
    Half-twist throttle for our HUB systems
    Engage the motor without pedalling, great for a standing start, or over-ride when in lower assist levels. Button engages CRUISE CONTROL on our systems, brake cutout will disengage. This half-twist model is designed to be mounted on the right hand side of the handlebar,...
    $40.00 AUD
    $40.00 AUD
  • Lever throttle for our HUB systems
    Lever throttle for our HUB systems
    Engage the motor without pedalling, great for a standing start, or over-ride when in lower assist levels. This is the lever model, which looks and operates much like a gear shifting lever. It sits anywhere on the narrow parts of the handlebar, including curved...
    $40.00 AUD
    $40.00 AUD
  • Standard Pedelec Fit Kit
    Standard Pedelec Fit Kit
    Standard Pedelec Fit Kit includes; Lockring tool, Crank remover and lockring. (No Pedelec Sensor Included in this kit)
    $65.00 AUD
    $65.00 AUD
  • Front Hub Motor Install Tool Kit
    Front Hub Motor Install Tool Kit
    Front Hub Motor Install Tool Kit includes; Tyre levers, crank extractor and spoke spanner.
    $50.00 AUD
    $50.00 AUD
  • Rear Hub Motor Install Tool Kit
    Rear Hub Motor Install Tool Kit
    Rear Hub Motor Install Tool Kit includes; Tyre levers, crank extractor, spoke spanner, chain whip and cassette removal tool.
    $80.00 AUD
    $80.00 AUD
  • Torque Bar for front forks
    Torque Bar for front forks
    For forks that don't have fender eyelets, or where the holes don't line up, this model is an improved variant of the standard hose-clamp model. Here, there are small slits for 2 or even 3 hose-clamps to provide extra spinout strength, and the long...
    $50.00 AUD
    $50.00 AUD
  • Torque Bar (standard pivot)
    Torque Bar (standard pivot)
    This is our standard model of torque bar, which secures the axle in the forks or rear dropouts, bracing the twisting forces of the motor (specifically the axle) against your frame. This model is suited to the thicker 14mm axles, or you can get...
    $30.00 AUD
    $30.00 AUD
  • Torque Bar for rear dropouts
    Torque Bar for rear dropouts
    Rear bicycle dropouts are usually thicker and stronger than the front fork dropouts, so more often than not a rear torque arm isn't necessary. But in cases with shallow vertical dropouts, or with powerful (>1000 watts) motor setups, it can be as important as...
    $55.00 AUD
    $55.00 AUD
  • LCD8 Display – Hub Motor
    LCD8 Display – Hub Motor
    LCD8 Display – Hub Motor Suits motor type: Hub Size: Large Colour: Colour Connector type: Green Juliette Cable length from display to buttons: 24cm Best for use when a large and easy to read display is required. Adapter cable available.
    $140.00 AUD
    $140.00 AUD
  • LCD7 Display - Hub Motor
    LCD7 Display - Hub Motor
    LCD7 Display Suits motor type: Hub Size: Small Colour: Colour Connector type: Green Juliette Cable length from display to buttons: integrated display and buttons Best for use when a discreet and small display is required, for example on cruiser bars or when a front...
    $130.00 AUD
    $130.00 AUD
  • LCD4 Display - Hub Motor
    LCD4 Display - Hub Motor
    LCD4 Display Suits motor type: Hub Size: Extra small Colour: Black and white Connector type: Green Juliette Cable length from display to buttons: integrated display and buttons Best for use when space on handlebars is limited. Adapter cable available.
    $100.00 AUD
    $100.00 AUD
  • Torque Bar ( Eyelet )
    Torque Bar ( Eyelet )
    This design was engineered to make use of the existing fender eyelet holes that are on most front forks. This can lead to a smaller arm and a tidier installation than using hose clamps around the fork, and we recommend its use whenever there...
    $40.00 AUD
    $40.00 AUD
  • Thumb throttle for our HUB systems
    Thumb throttle for our HUB systems
    Engage the motor without pedalling, great for a standing start, or over-ride when in lower assist levels. This is the standard thumb model, which sits anywhere (apart from curved sections) on the narrow parts of the handlebar. Spring release, so only powers motor when...
    $30.00 AUD
    $30.00 AUD
  • One-piece Pedelec Sensor
    One-piece Pedelec Sensor
    Easy to install one-piece pedelec sensor. Simply remove the crank arm and push it on! No need to fiddle with retaining rings!
    $35.00 AUD
    $35.00 AUD
  • Clip-on Pedelec Sensor
    Clip-on Pedelec Sensor
    Multi-magnet pedelec with clip-on sensor.
    $35.00 AUD
    $35.00 AUD
  • Thumb Throttle - Universal Hub Systems 3 Wires
    Thumb Throttle - Universal Hub Systems 3 Wires
    Universal thumb throttle (3-wires). Compatible with our HUB drive conversion kits.
    $30.00 AUD
    $30.00 AUD
  • Cut-out Brake Levers
    Cut-out Brake Levers
    These brake levers replace your existing levers, so you can connect your existing brake cables to these, and they have a second cable for sending the electrical signals back to the motor. Pulling these levers cuts power to the motor when used with geared...
    $30.00 AUD
    $30.00 AUD

Recently Viewed Products